SHRINKWRAP IRELAND / SCAFFOLD / CONTAINMENT / ENCAPSULATION

INTRODUCTION TO VERISAFE SHRINK FILMS WORLD LEADER IN THE MANUFACTURE OF FLAME RETARDANT SHRINK FILMS FOR THE CONSTRUCTION AND SCAFFOLD / ENCAPSULATION INDUSTRY

Bi - Directional Shrinkage

This is determined during the production by choice of Extruder and the blow ratio. As a result the shrinkage properties and mechanical properties of the film are determined.
Verisafe Films have similar contraction strength both vertically and horizontally making them unique in this respect to other shrink films on the market and thus ensuring perfect stretching of the film and also permanent shrinkage force over long periods and therefore superior resistance to wind gusts with a guarantee of up to 10 Beaufort.

Welding Properties

Welding strength is determined by the raw materials used as well as the capacity of the Extruder.
The welding of sheets and seams is very important and must be permanent for a long time as welds that dissolve or tear apart over time weaken the tension of the film and thus the stability of the work overall. Verisafe films are noted worldwide for their superior welding ability and rigidity over long periods in extreme environments.

Puncture Rsistance

This is determined by the blow grade of the Extrusion and the chemical composition. The unique propereties of Verisafe Bi-Directionality and chemical composition make our films unique in this area

UV Resistance

Different formulations are used depending on which region of the world the films are to be used in, ranging between 3-15 months and up to 2-4 years. The choice of additives is determined in order to ensure welding strength and shrinkage properties in all climate conditions.

For more information on Verisafe Flame Retardant films visit their website by clicking the link below.....

Read more...

VERISAFE SHRINK FILMS / SCAFFOLD / CONTAINMENT / ENCAPSULATION /Contact us on info@shrinkwrapireland.ie

Applications where Verisafe Shrink Films have been used accross a wide spectrum of industry, the photo opposite is of Ashford Castle in County Mayo Encapsulated in Verisafe FR300 by Celtic Scaffolding in 2015. This was one of the largest shrinkwrap projects in Ireland at that time, professionally undertaken with the project completed on time by Celtic Scaffolding.
Verisafe is one of Europes largest manufactures of Shrink Films for industry and also for the construction industry. Its Flame Retardant LPS range of Films are in high demand due to the stringent manufacturing process and on-going testing that is carried out on production runs in order to meet the criteria needed to achieve the LPS 1207 and 1215 BRE Audited certification.
Everybody knows that all cars are not the same even though they may look alike and have the same colour. This is also true for Shrinkwrap material, it is generally white in colour and comes on a roll but the difference is in the manufacturing process and the results can be found in the finished product.
To Find out more regarding the development of the the shrink wrapping industry in Ireland and job opportunities / companies seeking Shrink Wrap applicators see below

Read more...

Interior Partition Wall / Dust Containment Using Shrink Wrap

VERISAFE FR 300 SHRINK FILM

SHRINK WRAP IS NOW EXTENSIVELY USED ON LARGE PROJECTS IN THE PHARMACEUTICAL AND MEDICAL INDUSTRY WHERE LARGE AREAS NEED TO BE PROTECTED FROM DUST AND DEBRIS DURING RENOVATIONS OR EXTENSIONS TO EXISTING WORK AREAS. WHILE ALLOWING MANUFACTURING AND ASSEMBLY TO CARRY ON AS USUAL WHILE CONSTRUCTION WORK CONTINUES.
ZIPPER ACCESS DOORS CAN ALSO BE INCLUDED WHERE NEEDED TO ALLOW FREE MOVEMENT OF PEOPLE AND MATERIALS DURING CONSTRUCTION WORK.

Interior Partition Wall / Dust Containment Using Shrink Wrap

VERISAFE FR 300 SHRINK FILM


INTERNAL AREAS CAN BE COMPLETELY SEALED FROM FLOOR TO CEILING USING SHRINK WRAP ALLOWING CONSTRUCTION WORK TO CONTINUE WITHOUT INTERFERING ON THE NORMAL MANUFACTURING PROCCESS AT THE SITE.
ALL OUR SHRINK FILMS ARE FLAME RETARDAND (FR) OR LPS 1207 & 1215 IF REQUIRED COMPLYING WITH ALL BUILDING REGS AND EXCEEDING THEM

Interior Partition using Shrink Wrap

EXAMPLE OF HOW CLEAN THE WORK AREA CAN BE ONCE SHRINK FILM IS USED TO PROTECT FROM DUST AND DEBRIS DURING CONSTRUCTION WORK.
SHRINK FILM IS ALSO USED TO REDUCE THE FLOOR AREA OF A LARGE SITE IN ORDER TO HEAT AND KEEP THE AREA AT A CONSTANT TEMPERTURE TO FACILITATE NEW FLOOR COVERING OR SPECIALISED PAINT TO BE APPLIED IN THAT AREA.

Tunnel Structure / Verisafe FR 300 Shrink Film

The Versatility of Shrink Wrap can be seen here as it can be moulded into any shape or structure

VERISAFE FR 300

In this photo you can quite easily see where the different rolls have been heat welded together to form a continous bonded skin covering the whole bridge.

VERISAFE FR 300

Complete encapsulation projects are easily achieved using Verisafe Shrink Wrap as the rolls can be easily managed @ 7m x 15m per roll and with Verisafe superior heat welding capabilities large areas are easily covered.

VERISAFE LPS 320

Size is no object as this photo can testify to as each roll of Verisafe LPS 320 covers 105m2 with rolls being easily heat welded together to form a continous bonded surface without any holes or openings ideal for asbestos removal, sand blasting. painting or renovations of any kind in all weather conditions.

FOR MORE INFORMATION ON VERISAFE FLAME RETARDANT SHRINK FILMS CLICK THE LINK BELOW TO VISIT THEIR WEBSITE  ......

Read more...

VERISAFE LPS 320

Even Prefabricated Shrink Wrapped roof structures can be assembled off site and craned into position

BRIDGE RENOVATIONS / VERISAFE FR 300

No such thing as a "Bridge to Far" where Verisafe Shrink Wrap is concerned as companies all over Europe catch on to its superior heat welding quality and storm resistance capabilities compared to other competitors in the market
Photo 02

Shrinkwrapping - "Its only Limitation is your Imagination"

Photo 02

Recycling Programme

We offer a full recycling service for all waste shrinkwrap returned to us. This is done through one of our own companies Glenwood Environmental Limited, which have all the relevant facility permits for the Recycling and Granulation of Waste Plastics throughout Ireland.
© Shrinkwrap Ireland 2009-2017, by Sea Design